FAG 22320 Bearing

Specific dynamic load factor K:25 N/mm²; Tolerance shaft:e7; d:15 mm; Coefficient of friction µ max.:0.15; Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; Permissible sliding velocity v min.:0 m/s; α:105 °; B:16 mm; h:16 mm;

Basic Static Radial Load Rating Co:5850 N; Grease Speed Rating n1:18000 rpm; B:18.00 mm; Fillet Radius rb:0.10 mm; Oil Speed Rating n2:22000 rpm; D:32.0000 mm; Basic Dynamic Radial Load Rating C:8840 N; d:15.000 mm; Fillet Radius ra:0.30 mm;

Cap bolt, SAE grade:8; Ca:117.805 mm; End plug (suffix Y):X-5217-2; Adapter sleeve assembly:SNP 3052x9.7/16; h:69.85 mm; H2:95.25 mm; ba:96.838 mm; Pa:81.4 kN; Da:399.999 mm; Bearing limiting speed:1700 r/min;

Grease Speed Rating n1:5300 rpm; D:120.0000 mm; d:85.000 mm; Oil Speed Rating n2:6300 rpm; Basic Dynamic Radial Load Rating C:44900 N; Fillet Radius rb:0.60 mm; Basic Static Radial Load Rating Co:46500 N; B:18.00 mm; Fillet Radius ra:1.00 mm;

Dw:2.5 mm; r1,2 min.:0.2 mm; Mass needle roller:0.92 g; Lw:23.8 mm; r2 max.:0.8 mm; r1 max.:0.6 mm;

Lock nut:KM 34; B1:154 mm; Locking device:MB 34; d3:220 mm; B:26 mm; B4:28.5 mm; Mass adapter sleeve assembly:9.2 kg; Hydraulic nut:HMV 34 E; d:170 mm; G:M 170x3;

Calculation factor kr:0.02; Reference speed:1200 r/min; r1,2 min.:5 mm; s max.:9.3 mm; Basic static load rating C0:1960 kN; da max.:937 mm; D:990 mm; d:820 mm; E:943 mm; da min.:840 mm;

Grease Speed Rating Open/Shielded n1:19000 rpm; Oil Speed Rating Open/Shielded n2:24000 rpm; D:35.0000 mm; Accessories:One Shield & Snap-Ri; Oil Speed Rating n2:24000 rpm; B:11.00 mm; Basic Static Radial Load Rating Co:3250 N; d:15.000 mm; Grease Speed Rating n1:19000 rpm; Fillet Radius ra:0.64 mm;

Accessories:One Seal; Basic Dynamic Radial Load Rating C:8710 N; d:60.000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; Sealed Speed Rating n3:4800 rpm; D:78.0000 mm; Oil Speed Rating Open/Shielded n2:9000 rpm; B:10.00 mm; Basic Static Radial Load Rating Co:8000 N;

Da max.:520 mm; H:135 mm; Minimum axial load factor A:23.12; d:480 mm; Fatigue load limit Pu:1100 kN; d1:645 mm; ra max.:4 mm; D1:485 mm; B:39.5 mm; D:650 mm;

J min.:441.325 mm; P90°:136 kN; h:47.625 mm; H1:169.875 mm; ba:69.85 mm; End plug (suffix Y):EPR 21; Cap bolt, SAE grade:5; Da:289.999 mm; Mass pillow block:90.7 kg; R2:33.337 mm;

G3:9 mm; Mass adapter sleeve assembly:37.6 kg; d3:490 mm; A:4 mm; G:Tr 420x5; G2:M 6; d:420 mm; B5:66 mm; Hydraulic nut:HMV 84E; d1:400 mm;

Basic Dynamic Radial Load Rating C:34500 N; Grease Speed Rating n1:0 rpm; Basic Static Radial Load Rating Co:35500 N; d:70.000 mm; Fillet Radius ra:1.00 mm; B:20.00 mm; D:110.0000 mm; Oil Speed Rating n2:6500 rpm; Fillet Radius rb:0.60 mm;

B1:154 mm; d:180 mm; B2:160 mm; Mass withdrawal sleeve:5.5 kg; Nut for removal:KM 38; G:M 190x3; G1:26 mm; Hydraulic nut:HMV 38 E; d1:170 mm;

B:46.00 mm; Basic Static Radial Load Rating Co:110000 N; Fillet Radius rb:1.00 mm; d:65.000 mm; Oil Speed Rating n2:5100 rpm; Grease Speed Rating n1:3900 rpm; Fillet Radius ra:1.50 mm; D:120.0000 mm; Basic Dynamic Radial Load Rating C:104000 N;